---

name: dev-swarm-devops description: Setup development environment, MCP tools, GitHub repository, and Docker configurations. Use when user asks to setup devops, configure development environment, or start Stage 8 after tech specs.

AI Builder - DevOps Setup

This skill sets up the development environment foundation, including local/cloud environment setup, MCP tools configuration, GitHub repository settings, and Docker/Dev Container configurations.

When to Use This Skill

• User asks to setup devops or development environment
• User wants to configure GitHub repository
• User needs MCP tools setup for AI agent
• User wants Docker or Dev Container configuration
• Start Stage 8 after tech specs are defined
• When git remote -v shows no remote repository linked

Your Roles in This Skill

• DevOps Engineer: Setup and configure development environments, CI/CD pipelines, and deployment infrastructure. Identify the best local or cloud development setup based on project requirements and ensure all tools are properly configured for AI agent usage.
• Infrastructure Architect: Design and implement scalable, secure infrastructure solutions. Make decisions on containerization, environment isolation, and development workflow optimization.

Role Communication

As an expert in your assigned roles, you must announce your actions before performing them using the following format:

As a {Role} [and {Role}, ...], I will {action description}

This communication pattern ensures transparency and allows for human-in-the-loop oversight at key decision points.

Instructions

Follow these steps in order:

Step 0: Verify Prerequisites and Gather Context

1. Check if 07-tech-specs/ folder exists (mandatory):
   • If NOT found: Inform user they need to define tech specs first, then STOP
   • If found: Read all files to understand:
     • Technology stack chosen
     • Development tools needed
     • Infrastructure requirements

1.5 Verify previous stage completion (07-tech-specs):

• Read 07-tech-specs/README.md and list required docs
• If README is missing or required docs are missing:
  • Ask the user to start/continue stage 07, or skip it
  • If skip: create 07-tech-specs/SKIP.md with a short reason
  • If continue: STOP and return after stage 07 is complete

2. Check if 00-init-ideas/ folder exists (recommended):

   • If found: Read to understand all files

3. Check if this stage should be skipped:

   • Check if 08-devops/SKIP.md exists
   • If SKIP.md exists:
     • Read SKIP.md to understand why this stage was skipped
     • Inform the user: "Stage 8 (devops) is marked as SKIP because [reason from SKIP.md]"
     • Ask the user: "Would you like to proceed to the next stage (sprints)?"
     • If user says yes:
       • Exit this skill and inform them to run the next stage skill
     • If user says no:
       • Ask if they want to proceed with devops anyway
       • If yes, delete SKIP.md and continue with this skill
       • If no, exit the skill

4. Check if 08-devops/ folder exists:

   • If exists: Read all existing files to understand current state
   • If NOT exists: Will create new structure

5. If README.md exists: Check whether it requires diagrams. If it does, follow dev-swarm/docs/mermaid-diagram-guide.md and use the dev-swarm-mermaid skill to render outputs.

6. Assess Current Environment:

   • Run git remote -v to check if remote repository is linked
   • Check if .git directory exists
   • Look for existing MCP tools configuration
   • Check for .devcontainer/ folder
   • Check for Dockerfile or docker-compose.yml

7. Analyze Project Requirements:

   • Based on the tech stack (from 07-tech-specs/), determine if project needs:
     • Local development only
     • Cloud development environment
     • Containerized development
     • Specific MCP tools (Playwright, GitHub, AWS, etc.)
   • Identify complexity level:
     • Basic: Simple projects with minimal setup
     • Standard: Projects requiring GitHub + basic MCP tools
     • Complex: Projects requiring full cloud setup, multiple MCP tools, advanced Docker configurations

8. Proceed to Step 1 with gathered context

Step 1: Refine Design Requirements in README and Get Approval

CRITICAL: Create/update README.md first without pre-approval. Then ask the user to review/update/approve it, re-read it after approval, and only then create setup plan files.

1. Analyze information from previous stages:

   • Read 07-tech-specs/ to understand technology stack and tools
   • Consider cost-budget constraints for this stage
   • Assess current environment status

2. Create or update 08-devops/README.md with refined requirements:

   • Use the template in references/README.md
   • Follow the checkbox rules: checked items apply after README approval; create file items only after approval; propose default checks; allow user changes
   • Populate only the template sections; do not add new headings such as Documents or Deliverables
   • Follow dev-swarm/docs/stage-readme-guidelines.md before drafting
   • Refer to references/deliverables.md to select deliverables by project type
   • Present any choices as checkbox lists with a default selection
   • For L2 projects: Create a simple README (just several lines) indicating the project level and that only development-environment.md (for local setup) is required.
   • For L3+ projects: List deliverables explicitly in README (typical: github-setup.md, mcp-setup.md, vscode-devcontainer.md, ci-pipeline.md if CI selected)
   • Stage overview and objectives (based on previous stage context)
   • Owners: DevOps Engineer (lead), Infrastructure Architect
   • Diagrams (if required by project init):
     • Reference dev-swarm/docs/mermaid-diagram-guide.md
     • Include diagram/ deliverables when needed
   • What devops setup will include:
   • GitHub repository setup options (with checkboxes):
     • No Git repo (do not commit code)
     • Using dev-swarm's git repo
     • Create a new GitHub repo (default when no remote exists)
     • GitHub Actions for Continuous Integration (CI)
   • MCP tools configuration (list which tools)
   • Development Environment setup (development-environment.md) - Required for L2 projects
   • Development container setup (if needed)
   • CI pipeline configuration (if applicable)
   • Methodology:
     • How environment will be configured
     • What tools will be installed
   • Deliverables planned:
     • List of files that will be created (github-setup.md, mcp-setup.md, development-environment.md, ci-pipeline.md if CI selected, etc.)
   • Status: In Progress (update to "Completed" after implementation)

3. Notify user after README is created:

   • Say: "I have created README.md file, please check and update or approve the content."
   • Summarize the devops approach and what will be configured
   • Summarize what setup files will be created
   • Explain how it aligns with previous stages and tech stack

4. Wait for user approval:

   • If user says yes: Re-read README.md (user may have updated it), then proceed to Step 2
   • If user says no:
     • Ask what needs to be changed
     • Update README based on feedback
     • Ask for approval again, then re-read README.md before proceeding

Step 2: Create Setup Plan Files

Only after user approves the README and you re-read it:

IMPORTANT: The file structure below is a SAMPLE only. The actual files you create must follow what was approved in the README.md in Step 1.

These files serve dual purposes:

1. Initially: Setup plans/instructions for user approval

2. Finally: Documentation of the actual environment (source of truth for future reset/update)

3. Create files as specified in the approved README.md:

   Typical structure (example):

   08-devops/
   ├── README.md (created in Step 1, then reviewed/approved)
   ├── github-setup.md (if specified in README)
   ├── mcp-setup.md (if specified in README)
   ├── ci-pipeline.md (if CI selected in README)
   └── vscode-devcontainer.md (if specified in README)
   

   Create only the files listed in the README's "Deliverables planned" section.

4. Create setup plan files with proposed configurations:

NOTE: Use references/deliverables.md for file-by-file content guidance. Adapt based on the approved README and project needs.

Step 3: Get User Confirmation

1. Present all setup plan files to the user
2. Explain what will be configured/installed
3. Ask user to review and confirm before proceeding
4. Make any adjustments based on user feedback
5. DO NOT PROCEED until user explicitly confirms

Step 4: Execute Setup Tasks

ONLY AFTER USER CONFIRMATION, execute each setup:

1. Execute GitHub Setup:

   • Follow steps in github-setup.md or github-repo.md
   • Based on user's selected option:
     • If "No Git repo": Skip git setup entirely
     • If "Using dev-swarm's git repo": No changes needed, continue with existing repo
     • If "Create a new GitHub repo":
       • Ask for user approval before opening the browser or creating the repo
       • Use playwright-browser-* agent skills to automate browser interactions for creating the GitHub repo
       • Initialize git in src/ directory if not already initialized
       • Add the remote repo to src/ using git remote add origin <repo-url>
       • Add src/ as a git submodule to the root project using git submodule add <repo-url> src
       • Set the submodule branch to main unless the user specifies another branch
       • Record repository information in 08-devops/github-repo.md:
         • Repository URL
         • Repository name
         • Creation date
         • Default branch (main unless specified)
         • Submodule configuration
     • If user provides a remote repo URL:
       • Add src/ as a git submodule to root project using git submodule add <repo-url> src
       • Set the submodule branch to main unless the user specifies another branch
       • Record information in 08-devops/github-repo.md
   • Create branch protection rules (via GitHub CLI or web) if applicable
   • Create PR templates in .github/PULL_REQUEST_TEMPLATE.md if specified
   • Create issue templates if specified
   • Fix any errors encountered during setup
   • Retry failed steps with corrections

2. Execute MCP Tools Setup:

   • Follow steps in mcp-setup.md
   • Install/configure each MCP tool specified
   • Setup required credentials and environment variables
   • Create/update MCP configuration files
   • Test each MCP tool connectivity
   • Fix any errors encountered during setup
   • Retry failed steps with corrections
   • Document any manual steps user needs to complete

3. Execute Dev Container Setup:

   • Follow steps in vscode-devcontainer.md
   • Create .devcontainer/ folder
   • Create devcontainer.json with specified configuration
   • Create Dockerfile with specified contents
   • Create docker-compose.yml if specified
   • Build container to test
   • Fix any errors encountered during setup
   • Retry failed steps with corrections
   • Fix Dockerfile or configuration issues as needed

Step 5: Verification and Testing

For each completed setup:

1. Verify GitHub setup:

   • If a new repo was created or submodule was added:
     • Run git submodule status to verify src/ is properly configured as a submodule
     • Verify 08-devops/github-repo.md contains accurate repository information
     • Check that src/ has its own git repository with proper remote
     • Run git remote -v in src/ directory to confirm remote is linked
   • If using existing dev-swarm repo:
     • Run git remote -v to confirm remote is linked
   • Check branch protection rules are applied (if configured)
   • Verify PR templates exist and are formatted correctly (if created)
   • Test creating a test PR (if applicable)

2. Verify MCP tools:

   • Test each configured MCP tool with simple commands
   • Ensure AI agent can access MCP tools
   • Verify permissions are correctly set
   • Check environment variables are loaded
   • Document any issues or limitations

3. Verify Dev Container:

   • Successfully build container without errors
   • Start container and verify it runs
   • Check all specified tools/extensions are available
   • Test volume mounts work correctly
   • Verify port forwarding is configured
   • Test development workflow inside container

Step 6: Update Documentation Files

CRITICAL: Update all setup files to reflect actual environment:

1. Update github-setup.md or github-repo.md:

   • Change from "setup plan" to "current configuration"
   • Document which git repository option was selected
   • If git submodule was created:
     • Document the submodule configuration
     • Document repository URL and name
     • Document default branch (main unless specified)
     • Note whether the submodule is pinned to a commit/tag or tracking a branch
     • Document how to initialize/update the submodule
     • Document how to work with the submodule (commit, push, pull)
   • Document actual repository URL, settings applied
   • Document actual branch protection rules in place
   • Note any deviations from original plan
   • Add verification results
   • Add troubleshooting notes for any issues encountered

2. Update mcp-setup.md:

   • Change from "setup plan" to "current configuration"
   • Document actual MCP tools installed and versions
   • Document actual configuration file locations and contents
   • Document actual environment variables set
   • Add verification results
   • Add troubleshooting notes for any issues encountered
   • Document how to reset/reinstall each tool

3. Update vscode-devcontainer.md:

   • Change from "setup plan" to "current configuration"
   • Document actual container configuration
   • Add notes about successful build settings
   • Document any modifications made during setup
   • Add verification results
   • Add troubleshooting notes for any issues encountered
   • Document how to rebuild/reset the container

4. Update 08-devops/README.md:

   • Update current environment status to "Configured"
   • Add summary of what was set up
   • Add links to verification results
   • Note date of setup completion

These updated files now serve as the source of truth for:

• Future environment resets
• Environment updates
• Onboarding new team members
• Debugging environment issues

Step 7: Final User Review

1. Inform user that devops setup is complete

2. Update README.md:

   • Change Status from "In Progress" to "Completed"
   • Add a Summary section with key insights (2-3 paragraphs)
   • Add a Created Files section listing all created files

3. Present completed work to user:

   • Show the updated documentation showing actual configuration
   • Show verification results for all setups
   • Confirm everything is working as expected

4. Ask if they want to proceed to 09-sprints/ (next stage)

5. Make any final adjustments based on user feedback if needed

Step 8: Commit to Git

1. Ask user if they want to commit the setup:

   • Stage all changes in 08-devops/
   • Stage .devcontainer/ files (if created)
   • Stage .github/ files (if created)
   • Stage any configuration files (MCP configs, etc.)
   • Commit with message: "Setup DevOps environment and configurations"

2. Optionally push to remote (if GitHub was set up)